Constitutive modelling of alloy 625 fabricated through laser powder bed fusion at high strain rate and high temperature conditions

dc.contributor.advisorAranas Jr., Clodualdo
dc.contributor.authorLewis, Jonathan
dc.date.accessioned2023-09-18T14:29:25Z
dc.date.available2023-09-18T14:29:25Z
dc.date.issued2022-02
dc.description.abstractAlloy 625 is an important alloy in many industries including aerospace, providing good mechanical properties in high temperature and corrosive environments. It also retains good properties when additively manufactured using Laser Powder Bed Fusion (LPBF), a powder-bed additive manufacturing process that can produce nearly 100 percent relative density components. The LPBF process introduces complex heating and cooling cycles in the material used, thereby affecting the mechanical properties. As a result, existing constitutive models for alloy 625, are not applicable for the LPBF-fabricated material. This study therefore sought to obtain mechanical testing data to determine the appropriate coefficients to model the LPBF-fabricated material in the desired range of conditions for aerospace applications: high strain rates and temperatures. This was completed by fabricating samples of alloy 625 using LPBF, then compressing the samples at two strain rates, 700 s-1 and 1700 s-1 , and temperatures ranging from 298 K to 773 K using a Split Hopkinson Pressure Bar (SHPB) which recorded the strain rate and stress-strain curves. Additionally, the effects of a heat treatment process were examined by testing the hardness and dynamic compressive properties in the same manner. The information gained from the models was reinforced with micrographs and electron backscatter diffraction images to examine the microstructure of alloy 625 after LPBF. The results from the SHPB testing were then used to calculate the coefficients for five constitutive models, the Johnson-Cook model, a modified Johnson-Cook model, the Hensel-Spittel model, a modified Hensel-Spittel model, and a modified Zerilli-Armstrong model. The Average Absolute Relative Error (AARE) of these models was calculated, and it was iii determined that the modified Zerilli-Armstrong model had the lowest AARE of the models used, 2.88% for as-printed alloy 625 and 2.71% for heat-treated alloy 625.
dc.description.copyright© Jonathan Lewis, 2022
dc.format.extentxiii, 78
dc.format.mediumelectronic
dc.identifier.urihttps://unbscholar.lib.unb.ca/handle/1882/37411
dc.language.isoen
dc.publisherUniversity of New Brunswick
dc.relationNew Brunswick Innovation Foundation
dc.relationNatural Sciences and Engineering Research Council of Canada (NSERC)
dc.rightshttp://purl.org/coar/access_right/c_abf2
dc.subject.disciplineMechanical Engineering
dc.titleConstitutive modelling of alloy 625 fabricated through laser powder bed fusion at high strain rate and high temperature conditions
dc.typemaster thesis
oaire.license.conditionother
thesis.degree.disciplineMechanical Engineering
thesis.degree.grantorUniversity of New Brunswick
thesis.degree.levelmasters
thesis.degree.nameM.Sc.E.

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Jonathan Lewis - Thesis.pdf
Size:
3.08 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.13 KB
Format:
Item-specific license agreed upon to submission
Description: