Enhancing moisture barrier and grease resistance of paper for green-based packaging materials

dc.contributor.advisorXiao, Huining
dc.contributor.authorSong, Zhaoping
dc.date.accessioned2023-03-01T16:41:06Z
dc.date.available2023-03-01T16:41:06Z
dc.date.issued2014
dc.date.updated2016-11-22T00:00:00Z
dc.description.abstractPaper made of cellulose fiber from green plants is widely used in our daily life especially in packaging industry. Cellulose fibers, as the most abundant natural resource in the world, have numerous advantages, such as renewable, low cost, biodegradable, environment-friendly and nontoxic. However, due to the hydrophilic properties of cellulose fibers, paper is far insufficient for high-barrier applications, moisture barrier, and oil/grease barrier in particular. In order to improve its barrier properties and widen its applications, extensive studies have been carried out in the current thesis work. In the first section, hydrophobic modification of cellulose fibers was conducted via plasma-induced free radical polymerization in an attempt to graft the hydrophobic polymer chains on paper surface, thus increase the hydrophobicity of paper. Two hydrophobic monomers, butyl acrylate (BA) and 2-ethylhexyl acrylate (2-EHA), were grafted on cellulose fibers on the paper surface. In the second section, various biodegradable natural materials, including zein, starch, and sodium alginate were used to enhance paper hydrophobicity, lower the water vapour transmission rate and improve the oil/grease resistant properties of paper products, through both wet-end and surface coating technologies in bench-scale. In the third section, synthesized interpenetrating polymer networks composed of hydrophilic sodium alginate and hydrophobic poly (dimethyl siloxane) were applied to enhance barrier properties of paper via coating on paper surface. The feature of this work lies in the fact that the hydrophilic and hydrophobic phases were chemically linked into one interpenetrating polymer network during the preparation process, with the aim to make the most of the advantage of the complementary characteristics from these two polymers. It was found that, the paper hydrophobic properties have been improved significantly with rather high contact angle, due to the plasma induce polymerization, zein emulsion treatment and IPNs coating. The paper treated with sodium alginate and alkali-treat starch showed excellent grease resistant properties. However, the challenges in lowering water vapour transmission rate of the resulted paper treated with all these materials still remain; although the water vapour transmission rate has been lowered to a certain extent.
dc.description.copyrightNot available for use outside of the University of New Brunswick
dc.description.noteElectronic Only. (UNB thesis number) Thesis 9476. (OCoLC) 963941804.
dc.description.notePh.D.,University of New Brunswick, Department of Chemical Engineering 2014.
dc.formattext/xml
dc.format.extentxix, 195 pages
dc.format.mediumelectronic
dc.identifier.oclc(OCoLC) 963941804
dc.identifier.otherThesis 9476
dc.identifier.urihttps://unbscholar.lib.unb.ca/handle/1882/14325
dc.language.isoen_CA
dc.publisherUniversity of New Brunswick
dc.rightshttp://purl.org/coar/access_right/c_abf2
dc.subject.disciplineChemical Engineering
dc.subject.lcshCellulose fibers--Permeability.
dc.subject.lcshPaper coatings--Permeability.
dc.subject.lcshPackaging.
dc.subject.lcshHydrophobic surfaces--Permeability.
dc.subject.lcshSynthetic products--Permeability.
dc.subject.lcshWater vapor transport.
dc.subject.lcshGreen products--Permeability.
dc.titleEnhancing moisture barrier and grease resistance of paper for green-based packaging materials
dc.typedoctoral thesis
thesis.degree.disciplineChemical Engineering
thesis.degree.fullnameDoctor of Philosophy
thesis.degree.grantorUniversity of New Brunswick
thesis.degree.leveldoctoral
thesis.degree.namePh.D.

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
item.pdf
Size:
3.59 MB
Format:
Adobe Portable Document Format